Quixx 10003 - Acrylic scratch eraser, 50g

Product Information

To bring back the shine, apply a small amount of either plastic or metal polishing compound, just enough to cover the dull spot, and apply in circular motions with a clean, dry cloth. As before, wet one piece of 600 grit sandpaper and use circular motions over the scratched area for around three minutes, alternating with a dry piece as well. Rinse residue with water and examine your work; it may take a few applications and up to 10 minutes of elbow grease before you get the results you want.

However, if the scratch is any deeper than 5mm, it’s probably not worth doing as it’s unlikely to buff out. But it certainly suited Regenerate, which is primarily designed to be used with a rotary or dual-action polisher, although it can be applied by hand to take out swirls. To check the depth of the scratch, run over it with your fingernail – if it catches, you can consider it a deep scratch and the following method may work to remove it. FINACNE TABLE START ------------>

Delivery and Returns Information